Electronic speed control ensures that the same fine finish is achieved in all grades of timber, aluminum and plastics since the full wave electronic control ensures the selected speed in maintained under any load. Soft start to eliminate small initial movements that might misalign the cutter, especially important with such a powerful router. Routing depth setting with fine adjustment and magnified scale for simple setting. Two column precision guide with large phosphor bronze bushes for plunging accuracy in a high quality die cast aluminum housing so that carefully controlled plunge cuts can be made. Large comfortable handles with the on/off switch and plunge lock at your finger tips for excellent control. Dust extraction through the base mounted spout for virtually dust free routing. 3 stage depth stop adjustment enables recesses of various depths to be machined in one operation without time consuming setting up. Spindle lock mechanism for quick and easy cutter changes with a single spanner. Compact low profile design that provides easy handling and increases stability

Specifications

Power Input: 2000 Watts Power Output: 1400 Watts No Load Speed: 8000-20000 rpm Plunge Stroke/Movement: 80 mm Collet Size: 6-12.7 mm Max. Cutter Diameter: 50 mm Weight: 5.1 kg Length: 290 mm Height: 295 mm Hand/Arm Vibration: 3.1 m/s2 Uncertainty K 1 (Vibration): 1.5 m/s² Sound Pressure: 93 dB(A) Uncertainty K 1 (Sound): - dB(A) Accoustic Pressure: 102 dB(A) Uncertainty K 2 (Sound): - dB(A) This appliance is not designed for use in America. Only for countries that use 220 / 240 V electrical outlets.

Online charges for shipping are the approximate charges not the final shipping charge.

For Large Appliances above 80 pounds the shipping rates may vary depending upon state.

For Residential delivery there will additional $40 to $75 charge.

Due to the size and weight of this product, this product does not qualify for In-home Delivery. It will be shipped via Curbside Drop Off Freight service.

MAKE SURE TO OPEN THE PACKAGING AND FULLY INSPECT INSIDE OF THE SHIPMENT FOR ANY CONCEALED DAMAGES, BEFORE SIGNING FOR DELIVERY RECEIPT. DAMAGES ON THE OUTER CARTON IS A DEAD GIVEAWAY.

If any damages are found on the product itself, you have an option to decide if the damages are acceptable for your standard or not - If it's a very minor damage and you feel like you can live with it, please accept the delivery, and note the damage in Bill of lading (the delivery paper) before you sign it and contact us immediately. This is much more cost effective than refusing delivery just for small blemish and having to go through entire replacement process. - If it seems like damages are not acceptable in any ways, or seems to effect the proper functionality of the product, please refuse the delivery.