Velcro-type fastening for quick sheet changes
Exchangeable 10.8V Li-Ion battery and 1hr intelligent charger (not included)
Small and handy design, light weight and low vibration
Large soft grip area for easy handling
Comes complete with a set of sanding sheets
Product Description
The Bosch Cordless Multi-Sander PSM 10.8 LI (baretool) – compact, lightweight and powerful.
The Bosch PSM 10.8 LI is: a powerful, exceptionally lightweight and handy cordless multi-sander that is the successor of the “Bosch PRIO”. Truly versatile due to its compact size and low weight.
The PSM 10.8 LI multi-sander is suitable for smaller to medium applications such as sanding down garden benches, window and door frames, banisters, shelves and smaller pieces of furniture like chests of drawers or bedside cabinets. Anybody wishing to perform larger projects while enjoying the benefits of a cordless power tool, should use the PSM 18 LI cordless multi-sander, which has been part of Bosch's range since 2010.
Easy to operate
This tool weighs only 700 grams and is only about 24 x 12 x 10 cm in size. Moreover, this multi-sander has an especially large grip zone, so that it can also be comfortably operated with two hands. Softgrip surfaces enable it to be guided in a controlled manner. The low vibration and the compact, ergonomic design also contribute to the controlled handling of the tool. The on/off sliding switch positioned in the middle of the top makes it easy for both left- and right-handed people to operate the tool. For dust-free working a conventional vacuum cleaner can be connected to the tool using the supplied adapter.
Power Automatic – Automatic power increase by increased pressure
The Bosch Multi Sander features “Power Automatic”. Due to the special innovation the PSM 10.8 LI reacts automatically to more pressure of the user by applying more power to the sanding surface. The user normally applies increased pressure in areas where the surface is particularly rough. When this happens, the PSM 10.8 LI automatically increases its power and therefore the material removal rate. When the amount of pressure is reduced, the power drops again and you can carry on working gently. This results in evenly sanded surfaces and rapid work progress. Power Automatic also controls the given pressure by flashing the red battery indicator LED on top of the tool to guide users in how much pressures is needed to work efficiently.
The Multi-Sander is especially portable and versatile due to its changeable 10.8 Volt Lithium-Ion battery that is compatible with all Bosch DIY tools in this voltage class. Lithium-Ion batteries have hardly any self-discharge, so the multi-sander is ready to use even after lengthy breaks. The batteries also have no memory effect, so they can be recharged at any time without suffering a deterioration in battery performance. They are charged very quickly thanks to the one-hour charger that is supplied as standard.
Easy changing with the micro Velcro-type fastening system
Tried-and-tested product features of the predecessor, such as the special shape of the sanding plate and the micro Velcro-type system for fastening the sanding paper, have been kept in the PSM 10.8 LI. The sanding plate combines the functions of an orbital sander with those of a delta sander. Its sanding plate resembles the sole of a small iron and consists of two parts. The rear part is fixed and the delta-shaped sanding plate tip is rotatable: if the front corner of the sanding paper is worn down, you can rotate the sanding plate tip together with the sanding paper, or you can simply remove the sanding paper and fix it on again using the micro Velcro-type fastening system. In both cases, all three corners of the sanding paper are used and worn down equally, which triples the paper’s service life.
Box Contains
1 x Bosch PSM 10.8 LI Multi-Sander
3 x Sanding Sheets - Wood (P80, P120, P180)
1 x Dust Extraction Adapter
1 x Instruction Manual
1 x Cardboard Box
The PSM 10.8 LI (2.0 Ah) Mult-sander (Baretool)
The PSM 10.8 LI (2.0 Ah) is a cordless, lithium-ion powered multi-sander. It is lightweight, compact and powerful, thanks to its ergonomic design. . Intelligently managing the interaction between the battery, motor and gearbox the Bosch Syneon Chip provides optimum power and maximum endurance throughout your project. Equipped with a wide range of features such as Bosch power automatic for optimum power, a velcro-type sanding sheet system for quick fastening, and a dust extraction port. The PSM 10.8 LI (2.0 Ah) enables you to master a wide variety of sanding tasks in just a matter of seconds. Ideal for small to medium sized DIY projects, you can use the versatile multi-sander for removing old varnish and paint from furniture or sanding window sills and banisters.
Bosch Syneon Chip
Bosch’s innovative Syneon Chip technology forms part of a unique electronic control system that efficiently manages the coordination of battery, motor and gears within your tool, delivering optimum power and maximum endurance for the task at hand. This intelligent Syneon Chip delivers the perfect amount of energy required for your project and can be found in all Bosch cordless Lithium-ion 10.8V, 18V and 36V DIY products.
The Right Amount of Power for All Surfaces
The PSM 10.8 LI (2.0 Ah) features Bosch power automatic technology for optimum sanding power and higher material removal rate. The power automatic technology reacts to the amount of pressure applied by the user, therefore increasing power automatically. When the amount of pressure is reduced, the power drops again and you can carry on working gently.
Better for Small Sanding Tasks
The PSM 10.8 LI's (2.0 Ah) compact design makes it a good tool for small to medium sized DIY projects, such as sanding corners and edges of window sills, removing old varnish or paint from garden furniture. Don't be duped by its size, supplied with a 10.8 V (2.0 Ah) lithium-ion battery, this is a small tool with a lot of power.
More Running Time, More Power and a Longer Battery Life
Experience more power, longer runtime and a longer battery life, all thanks the 10.8 V LI battery upgrade. This battery upgrade from 1.5 Ah to 2.0 Ah means that users can now experience a 33 per cent longer running time when working, with increased power and a longer battery lifetime. More DIY’ing and less charging.
Part Number 0.603.976.901
Item Weight 699 g
Product Dimensions 29.2 x 14 x 13 cm
Batteries: 3 Lithium ion batteries required.
Item model number 0603976901
Power Source Cordless
Voltage 10.8
Wattage 21.6 watts
Item Package Quantity 1
Batteries Included? No
Batteries Required? Yes
Battery Cell Type Lithium Ion
Battery Description Lithium-Ion (Li-Ion)
Weight 700 Grams