Variable 2-speed 1/2" Hammer Driver-Drill (0-400 & 0-1,500 RPM) with Makita-built 4-pole motor delivers 480 in.lbs. of Max Torque and weighs only 4.0 lbs. Variable speed Impact Driver (0-2,300 RPM & 0-3,200 IPM) provides 1,420 in.lbs. of Max Torque and weighs only 3.3 lbs. 6-1/2" Circular Saw delivers 3,700 RPM for faster cutting and ripping through wood and weighs only 7.3 lbs. 4-position flashlight with Xenon bulb runs up to 4 hours per charge. LXT Lithium-Ion battery and optimum charging system produces 430% total lifetime work with 3x more cycles. Makita Lithium-Ion battery provides longer run time, 5x lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power). The charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature. It has a built-in fan to cool the battery which helps produce more lifetime work. 3-year warranty on tools and 1-year warranty on flashlight, batteries and charger.

Makita LXT405220 220V 18V 4-Pc Combo Kit

Specifications

Battery: 18V LXT Lithium-Ion

Charger: 220V

LXPH01Z 18V LXT Li-Ion 1/2" Hammer Driver-Drill

Capacity in Steel: 1/2"

Capacity in Wood: 1-1/2"

Capacity in Masonry: 1/2"

No Load Speed Low: 0-400 RPM

No Load Speed High: 0-1,500 RPM

Blows Per Minute Low: 0-6,000 BPM

Blows Per Minute High: 0-22,500 BPM

Max Torque (in. lbs.): 480

Overall Length: 8-1/8"

Net Weight (lbs. w/battery): 4.0

BSS611Z 18V LXT Li-Ion 6-1/2" Circular Saw

Blade Diameter: 6-1/2"

Arbor: 5/8"

No Load Speed: 3,700 RPM

Max Cutting Depth @ 90°: 2-1/4"

Max Cutting Depth @ 45°: 1-9/16

Max Cutting Depth @ 50°: 1-7/16"

Overall Length: 13-5/8"

Net Weight (lbs. w/battery): 7.3

BJR182Z 18V LXT Li-Ion Recipro Saw

Length of Stroke: 1-1/8"

Max Cutting Depth Pipe: 5-1/8"

Max Cutting Depth Wood w/12" blade: 10"

Strokes per Minute: 0 - 2,900 SPM

Overall Length: 17-3/4"

Net Weight (lbs. w/battery): 7.9

LXDT04Z 18V LXT Li-Ion Impact Driver

Hex Shank: 1/4"

No Load Speed: 0 - 2,300 RPM

Impacts per Minute: 0 - 3,200 IPM

Max Torque (in.lbs.): 1,420

Overall Length: 5-7/16"

Net Weight (lbs. w/battery): 3.3

BGA452Z 18V LXT Li-Ion 4-1/2" Cut-Off/Angle Grinder

Grinding/Cut-Off Wheel: 4-1/2"

Wire Cup Brush: 3-1/2"

No Load Speed: 10,000 RPM

Spindle Thread: 5/8" x 11 UNC

Overall Length: 12-1/2"

Net Weight (lbs. w/battery): 5.0

BML185 18V LXT Li-Ion Flashlight

Run Time: up to 4 hours

Overall Length: 11-1/8"

Net Weight (lbs/ w/battery): 2.1

Includes

18V LXT Lithium-Ion 1/2 Inch Hammer Driver-Drill LXPH01Z, 18V LXT Lithium-Ion Impact Driver LXDT04Z, 18V LXT Lithium-Ion 6-1/2 Inch Circular Saw BSS611Z, 18V LXT Lithium-Ion Flashlight BML185, two 18V LXT Lithium-Ion Batteries BL1830, 220 volt charger and contractor bag 831284-7.

Includes 4 Tools

Power Source Cordless

Voltage 220V

This appliance is not designed for use in America. Only for countries that use 220 / 240 V electrical outlets